Let’s not kid ourselves. The Peak is a serious gadget for enjoying whatever concentrate you prefer, giving off the purest expression of the strength, effects, and flavor of the plant they're made from. For the uninitiated, this results in the most effective and pleasurable experience, quicker and easier than anything you’ve experienced, with virtually zero downtime for learning.

Technology

And speaking of technology, let’s get down to it. The Puffco Peak is to desktop vaporizers as a Tesla Model X is to cars – soft edges, top-tier technology, a sensual design, and more power under its skin than you ever imagined. Among its geek-inspired technology are:

• Multiple user heat settings - That’s right, the Peak caters to every user and preference. Small or big loads, big clouds or flavor, regardless of consumption needs, there’s an ideal setting just for you. And the Sesh-mode allows you to lengthen your session – welcome to the first social dab encounter.
• Twenty seconds to heat up - The typical dab rigs have a three-minute process of heating and cooling, but not the Peak. A 20-second heat-up time leads to shorter wait time and greater consumption.
• Automatic temperature calibration - A more reliable experience during frequent use and sesh-mode is assured, thanks to the Peak’s built-in smartware to necessarily adjusts heat times when the bowl is still hot.
• LED lights! With haptic feedback - A discreet light band displays heat cycle and battery indicators as needed and suppresses itself if they're not. Haptic feedback assures you're getting the ideal hit.
• Supercharging goodness - The Peak battery goes from zero to fully charged in two hours when plugged into the supercharger, good for about thirty dabs.

Highlights

• Hand-blown borosilicate glass
• Water filtration
• Four distinctive controllable heat settings
• Heats up within twenty seconds
• Intelligent temperature calibration
• Sesh-Mode operation
• 7” high x 2.75” base
• Two-hour charge time
• Battery provides 30 dab average
• Removable ceramic bowl
• LED light band
• Includes carrying case
• Haptic feedback
• Includes silicone base

Included with each purchase

• Puffco Peak
• Carrying case
• Tether
• Cleaning Swabs
• Loading tool
• Micro USB cable and supercharger
• Carb cap
• Extra ceramic bowl

Accessories

• The Peak Travel Pack - The travel pack is the ideal companion for the active dabber. It includes: Carb Cap Tether, Backpack, Splash Cap, and Atomizer Cover. Each item is 100% Silicone, FDA-approved material, and dishwasher safe.
• The Peak Atomizer - The atomizer is a thermal-banger type, designed for optimum heat performance. It lacks coils, glues, fibers, or plastics, delivering the cleanest consumption experience imaginable. It includes a ceramic bowl which gives the best possible flavor and heat profile. It’s also available in a convenient three-pack.
• The Peak Colored Glass - The borosilicate colored glass piece offers style and flair, and features percolation water filtration to ensure a soft hit each time. Minimalist fashioning and a blasted inner cone supplement the Peak design impeccably. Storage and cleaning simple as the attachment effortlessly snaps in and out of the base.

Top Questions

How Do I Clean My Peak?

In preparation for cleaning, gently detach the glass attachment before detaching the atomizer. Also, make sure to allow the bowl to cool down prior to disconnecting the atomizer from the base.

1. Clean glass and carb cap by soaking in Isopropyl Alcohol (99% preferred). Make sure to rinse with water afterward.
2. Atomizer can be cleansed by soaking fully assembled part in Isopropyl Alcohol (99% preferred). “DO NOT RINSE WITH WATER, AS WATER EXPOSURE TO CERAMIC CAN POTENTIALLY DAMAGE THE PART.” Make sure to wash the gold connector pin on the bottom and base of the atomizer with an alcohol-soaked cotton swab.
NOTE: IF YOUR BOWL CAN’T BE EASILY REMOVED, DON’T TRY TO FORCEFULLY REMOVE. Please refer to the extended cleaning instructions via Puffco.com/pages/support or contact support via Puffco.com/warranty.
3. WARNING: After washing, allow all parts to completely dry before use.
• Before disconnecting atomizer, make sure the bowl is completely cooled.
• The Peak is electric and will stop working if it gets wet.
• Fully clean the Peak every 20 uses or so.

How do I use my Puffco Peak?

1. The Peak should be fully charged before you use it for the first time, which should take about 2.5 hours and is indicated when the pulsing white light turns off. For optimum charging, only use the micro USB charger included with the unit, otherwise a third-party charger could damage the device and void the warranty.
2. Next, the glass attachment should be filled with water to a level right above the air holes. Water shouldn’t be added to the lower glass section, and don’t add water to the Peak when it’s connected to the base.
3. You can now attach the glass to the Peak base, lining up the inlet hole at the glass front with the atomizer. Then gently push the face of the glass into the Peak base, then into the back. You can lock or unlock the unit by pressing the button for about three to five seconds. You can toggle through the heat settings with single clicks of blue, then green, then red, then white. The loading tool can be utilized to add content on the bowl’s bottom surface.
4. Next, put the carb cap on the top of the atomizer.
5. After double-clicking to start heating the unit, the Peak should reach optimum heat within 20 seconds, but you can press and hold the button whenever you choose to get out of the heating cycle.
6. You’ll know the Peak is ready for use when it vibrates and lights flash three times.
7. Remember: The Peak should be cleaned after each use with a cotton swab.